Ask Aeroz

Type the question you actually came here with.

Chips & capabilities

The smart chip that makes a product prove it’s real.

Aeroz makes NFC and RFID smart chips. Each one gives a product its own identity and a record anyone can check. Use them to stop counterfeits, trace products, and carry a Digital Product Passport. Five chips, one system.

NFC tap-to-verifyUHF RFID track & traceTamper-evidentCold-chainGS1 & EPCIS 2.0Digital Product Passport
Five chips

Pick the chip for the job.

Start with what you need to prove. The table points to the chip; the cards below show how each one connects, how we use it, and which rules it supports.

You need toPickHow it is readTypical range
Prove one item is genuine, with a phoneAeroz VerifyAny NFC smartphone, no appA tap (up to 0.1 m)
Count and move cases, pallets, or a whole roomAeroz TraceA RAIN RFID reader at the dock or in handUp to 10 m, hundreds per pass
Do both on the same unitAeroz DuoPhone at the shelf, reader at the dockBoth of the above
Show a package was opened or refilledAeroz GuardA seal that reads VOID on the next scan once it is broken
Show the cold chain heldAeroz SenseA chip that records temperature along with the product’s identity

Ranges are typical for compliant hardware in normal conditions and vary with the antenna, the reader, and what the tag is attached to. See NFC, RFID and QR compared.

Aeroz Verify

NFC · 13.56 MHz · tap to authenticate An NFC chip in the label, cap, or package. Tap it with any modern smartphone — no app needed — to check the product is genuine and see its record.
Phone tapany NFC phoneAeroz Verifybound chip identityAeroz checkinstant verifyGenuinepass / failA printed code can be copied; the bound chip is designed to be clone-resistant.
How we use it

We use Aeroz Verify at the moment someone needs to know an item is real: a shopper, pharmacist, inspector, or patient. Each chip carries its own identity and is designed to be clone-resistant.

Best for
  • Anti-counterfeit at the shelf, bedside, or border
  • Consumer engagement and product registration
  • Pharmacy and inspector verification
Compliance & standards
DSCSA §582 verification (US pharma)EU FMD unique identifierUAE TatmeenAnti-counterfeit & brand protection

Aeroz Trace

UHF RFID · 860–960 MHz · read at range A UHF RFID smart tag read at distance and in bulk — hundreds of items in a single sweep, with no line of sight required.
UHF readerread at rangeTagged unitshundreds at onceEPCIS eventscustody logOne sweep reads hundreds of units at distance — no line of sight, custody auto-logged.
How we use it

We use Aeroz Trace to move product quickly and log each handoff automatically: dock-door reads, room-level inventory, and shipping and receiving events written straight to the traceability record.

Best for
  • High-speed warehouse and inventory counts
  • Automatic shipping / receiving custody events
  • Case, pallet, and room-level tracking
Compliance & standards
DSCSA package-level tracingEPCIS 2.0 traceabilityFSMA 204 food traceabilityGS1 serialization & aggregation

Aeroz Duo

NFC + UHF paired · one bound identity Our flagship: both radios — NFC and UHF RFID — carried on a single, bound identity. We call it the bound pair.
Aeroz Duopaired NFC + UHFOne identitycross-verifiedBackend matchtwo radios agreeNFCUHFBoth radios attest to the same unit — a clone of one is designed to be caught.
How we use it

We use Aeroz Duo for end-to-end coverage: UHF moves the product at logistics speed while NFC delivers point-of-use authentication on the very same unit. The two radios cross-check each other and the backend record, so defeating one is not enough.

Best for
  • End-to-end authentication and traceability on one unit
  • High-value goods that need both speed and proof
  • Programs that span the warehouse and the shelf
Compliance & standards
DSCSA end-to-endEU Digital Product Passport (ESPR)EU Battery Passport (Reg. 2023/1542)UN Transparency Protocol (UNTP)

Aeroz Guard

Tamper-evident · first-open detection An authentication chip built into a tamper-evident seal that detects opening or removal and permanently changes state.
SealedintactOpenedseal brokenVOIDVOID loggedto custody recordA broken seal reads VOID on the next scan and is written to the custody record.
How we use it

We use Aeroz Guard to prove a package has not been opened or refilled: a broken seal shows as VOID on the next scan, and the event is logged to the product's custody record.

Best for
  • Tamper-evidence for pharma, spirits, and cartons
  • First-open detection and refill defense
  • Controlled and high-diversion goods
Compliance & standards
EU FMD anti-tampering device (ATD)DSCSA suspect-product handlingControlled-substance tamper-evidenceFirst-open assurance

Aeroz Sense

Sensor-enabled · cold-chain & conditions A sensor-enabled smart chip that records conditions such as temperature alongside the product's identity.
Aeroz Sensecondition tagCold chainlogged end-to-endExcursionauto-quarantineTemperature is logged the whole way; an excursion flags and quarantines the unit.
How we use it

We use Aeroz Sense to prove the cold chain held: it captures exposure in transit and flags excursions, so a compromised unit can be quarantined before it reaches a patient or shelf.

Best for
  • Cold-chain proof for vaccines, biologics, and specialty pharma
  • Temperature-sensitive food and beverage
  • Condition-based quality and quarantine decisions
Compliance & standards
GDP cold-chain (Good Distribution Practice)Vaccine & biologic cold chainFSMA 204 temperature recordsEU GDP Annex compliance
What the system does

From a chip to a capability.

The chip is the anchor. The Aeroz platform turns it into results you can build a program on. Open any one.

Authenticate every unit

Give each item its own identity, and let anyone check it with a tap.
  • Unit-level identity bound to the physical product, on chips designed to be clone-resistant
  • Tap-to-verify for consumers, staff, inspectors, and patients
  • Suspect-product handling and a clear genuine or not-genuine answer

Track and trace end to end

Follow every unit from line to last mile, with a custody record you can show an auditor.
  • Serialized identity (GS1) with a resolvable Digital Link
  • Append-only custody events at every handoff (EPCIS 2.0)
  • Aggregation from item to kit to case to pallet

Protect and prove integrity

Show the package is intact and act fast when something is wrong.
  • Tamper-evidence and VOID-on-break seals
  • Chain-of-custody proof for audits and disputes
  • Recalls and market withdrawals, down to the single unit

Engage customers and patients

Turn the tap into a first-party relationship and a data signal you own.
  • Product registration, warranty, loyalty, and re-order
  • Adherence, refill, and genuine-medicine checks for patients
  • First-party scan analytics and grey-market / diversion signal

Meet the mandates

One anchor that supports the regulations landing across your markets.
  • US DSCSA (§582) package-level traceability and verification
  • EU Digital Product Passport (ESPR) and the EU Battery Passport
  • FSMA 204, EU FMD, UAE Tatmeen, and the UN Transparency Protocol

Run at any scale

Provision one unit or millions, and manage many brands and partners cleanly.
  • Batch and bulk provisioning; import tens of thousands of units at once
  • Multi-tenant organizations, roles, and white-label
  • Dashboards, exports, and an operations console

Specialized workflows

Deep support for the programs that need more than a scan.
  • Clinical trials: kit-to-subject binding, drug accountability, and reconciliation
  • Kits and assemblies: bill-of-materials verification and kit-level recall
  • Cold chain: condition capture, excursion flags, and quarantine
Compatibility

Works with what you already run.

Built on open standards. It runs on its own and connects to your ERP and hardware, so nothing has to be replaced.

Standards we speak

  • GS1 Digital Link and GS1 DataMatrix (incl. AI(715) for FDA NDC-12)
  • EPCIS 2.0 (ISO/IEC 19987) event and custody data
  • The UN Transparency Protocol and W3C Verifiable Credentials
  • The EU Central Digital Product Passport Registry

Systems we connect to

  • ERP and commerce: NetSuite and Shopify today; SAP, Oracle, and Dynamics via our connector framework
  • Serialization systems (L4–L5): optional; Aeroz runs on its own and exchanges data with yours through EPCIS 2.0 if you have one
  • CRM and content platforms for engagement and loyalty

Hardware it runs on

  • Any NFC-capable smartphone — no special reader for consumers
  • Fixed UHF readers, portals, and handhelds for logistics
  • Standard tag printers and encoders

How you integrate

  • REST APIs and webhooks for anything without a prebuilt connector
  • CSV and manual upload, plus downloadable exports on every table
  • A verification endpoint you can embed in your own app or store
Common questions

NFC, RFID, and the chip, explained.

What is the difference between NFC and RFID for product authentication?

NFC (13.56 MHz) is a short-range, phone-tappable read — ideal for a person confirming one item is genuine. UHF RFID (860–960 MHz) reads many items at a distance — ideal for logistics and inventory. Aeroz can deliver either, or both on one bound identity (Aeroz Duo), so you get authentication and track-and-trace from the same chip.

Can one chip do both NFC and RFID?

Yes. Aeroz Duo carries both an NFC and a UHF RFID radio on a single, bound identity. The two radios cross-verify each other and the backend record, which is far harder to defeat than either alone.

Does it work with GS1 and the Digital Product Passport?

Yes. Aeroz is standards-first: GS1 Digital Link and DataMatrix, EPCIS 2.0, the UN Transparency Protocol, W3C Verifiable Credentials, and the EU Central DPP Registry. The chip is the physical anchor that makes a Digital Product Passport verifiable and harder to copy.

How does a smart chip stop counterfeits?

Each Aeroz chip carries a cryptographic, unit-level identity that is bound to the physical item. A counterfeiter can copy a printed code or a label image. The secure chip is bound to the genuine item and designed to be clone-resistant. Tamper-evident editions add proof that the package has not been opened or refilled.

Which Aeroz chip do I need for DSCSA, the EU Digital Product Passport, or cold chain?

Aeroz Verify covers DSCSA verification, EU FMD, and Tatmeen authentication; Aeroz Trace covers DSCSA package-level tracing, EPCIS 2.0, and FSMA 204; Aeroz Duo (paired NFC + UHF) covers the end-to-end picture including the EU Digital Product Passport, the EU Battery Passport, and UNTP; Aeroz Guard adds EU FMD anti-tampering and suspect-product handling; and Aeroz Sense adds GDP cold-chain and temperature records. A short audit maps your products and mandates to the right one.

How ordering works

Test it on your product before you commit.

  1. 1

    Tell us the product

    What it is, how it is packaged, and roughly how many units. The form is short.

  2. 2

    We reply within one business day

    You get a recommended chip and a quote for a sample pack or production rolls.

  3. 3

    Try a sample pack of 50

    Put the tags on your own product and read them with your own phones and readers, then order production rolls.

Build your program

Tell us your product. We’ll spec the chip.

Order a sample pack to test on your own product. If a regulation is driving the project, a fixed-fee, 14-day Readiness Audit matches your product and rules to the right chip, with a written plan and no commitment to proceed.

Go deeper

  • Technology — how the anchor binds identity to the unit.
  • Platform — the verification layer end to end.
  • Glossary — NFC, RFID, EPCIS, and DPP terms.